change currency to: Euro Złoty |
PistonSwitch15High quality pushbutton switch, can work with LITSW directly, or if you need brighter backlit - in conjunction with LITBO. White cap only. The switch is delivered with cap removed to insert any marking inside, printed on transparent foil. Very easy to assemble, just insert your graphics into the cap, then diffusor (that white circle), align and push untill it snaps.
Picture below shows how the botton lights up when driven by LITSW board. In typical conditions this is exactly how button should shine in my humble opinion. Of course it's impossible to show in a picture. Connections are marked on the back as follows: C - common, NO - normally open switch, NC - normally closed switch, +/- are for the backlit, polarity does not matter. For easier wiring with LITSW you can connect it like this
|